spool KR.

Discussion in 'SD and SD2 Chip Support for Buicks' started by typetmkp, Jun 23, 2019.

  1. typetmkp

    typetmkp Active Member

    Please look at log and advise. In spool up heavy accel i will get KR. Don't see anything out of sorts. if i stay in it, it goes away. Not sure if it is false or not.(tires sometimes starting to break loose) do you see anything? i do have a hops switch that triggers second fuel pump at around 13psi but i do not see any volt spikes, gross lean or rich. possibly pull some timing??
    Also is there a way to log fuel pressure? assume with 0-5v pressure switch into com board.
     

    Attached Files:

Share This Page