IGN1A Smart Coils

Discussion in 'ecu-GN Tech Help' started by weeee_6, Jul 1, 2019.

  1. weeee_6

    weeee_6 New Member

    Is there instructions for adding the smart coils with the adapter harness? I am guessing that some wires get rerouted from the main plugs to the green plug on the side? Just trying to figure out what all is involved.
     
  2. weeee_6

    weeee_6 New Member

    [​IMG] I think this PCB is what is confusing me..
     
  3. EricM

    EricM Administrator Staff Member

    That PCB plugs into the original module connector to pass through some of the signals to the ECU

    There are some wires that go to the ECU also, that have the connector for the green socket on the ECU. That just plugs in.
     

Share This Page